Home / Installers / Solar Panels / WA / Melville City

WA 6154 Β· Melville

Solar Panel Installation in Melville City, WA

Find a vetted solar installer in Melville City. Compare quotes, check local solar data, and get a system designed for your roof.

Get Free Solar Quotes

Solar Snapshot for Melville City

Key data for sizing a solar system in Melville City, WA 6154.

10,621

Population

5/day

Peak Sun Hours

9,636

Est. Annual Output (6.6 kW)

$1,359

Est. Annual Savings

3.7 yrs

Est. Payback (6.6 kW)

$3,159

STC Rebate (6.6 kW)

Zone 2

Dwelling Mix in Melville City

Breakdown of dwelling types based on census data β€” relevant for understanding rooftop solar potential.

Houses

72%

2,857 dwellings

Townhouses

26%

1,017 dwellings

Apartments

3%

101 dwellings

Melville City is predominantly freestanding houses, ideal for rooftop solar installation.

Solar Adoption in Melville City 6154

Installation data from the Clean Energy Regulator, current to May 2026.

2,340

Solar Systems Installed

Since 2001

6.6 kW

Avg System Size

15.5 MW

Total Installed Capacity

213

Battery Systems

Melville City (6154) has 2,340 registered solar panel installations with a combined capacity of 15.5 MW. The average system size in this postcode is 6.6 kW. That's roughly 23% of dwellings with rooftop solar.

Installations grew 2% in 2025 compared to 2024, with 132 new systems registered so far.

Is Solar Worth It in Melville City?

Melville City gets 5 peak sun hours per day β€” above the national average. A 6.6 kW system here would produce roughly 9,636 kWh per year, saving an estimated $1,359 annually and paying itself off in 3.7 years.

At $5,041 after rebates, the upfront cost represents 5% of Melville City's median household income ($107,068/year). A relatively small outlay for a 20+ year asset that generates returns from day one.

Around 23% of dwellings in Melville City have solar, below the Western Australia average of 36%. This means there's significant room for more installations β€” and early adopters tend to benefit most from current rebate levels before they taper off.

With a payback under 4 years and 20+ years of remaining system life, solar in Melville City is one of the stronger return-on-investment cases in Western Australia. The question isn’t really whether solar is worth it here β€” it’s what size system to get.

Why Install Solar in Melville City?

With 5 peak sun hours per day, Melville City receives above-average solar irradiance for Australia. A standard 6.6 kW rooftop system here can generate approximately 9,636 kWh per year, saving an estimated $1,359 annually on electricity bills.

Melville City has a population of 10,621 across 9,962 dwellings. Western Australia's solar-friendly climate combined with electricity rates around 31c/kWh makes solar a strong choice for WA households.

The median household income in Melville City is $107,068 per year. At $5,041 after rebates, a 6.6 kW system represents 5% of annual household income, with savings that continue for 20+ years after the 3.7-year payback.

With car ownership at 93% of households, many residents in Melville City could benefit from pairing solar with a home EV charger. Charging an electric vehicle from rooftop solar can save $1,000 to $1,500 per year compared to grid charging.

Estimated Solar Output & Payback in Melville City

Based on 5 peak sun hours/day, 31c/kWh electricity, and STC Zone 2 rebate.

System Size Annual Output Annual Savings Cost After Rebate Payback
5 kW 7,300 kWh $1,029 $4,121 $2,379 STC rebate 4 yrs
6.6 kW Most popular 9,636 kWh $1,359 $5,041 $3,159 STC rebate 3.7 yrs
10 kW 14,600 kWh $2,059 $6,742 $4,758 STC rebate 3.3 yrs
13 kW 18,980 kWh $2,676 $8,299 $6,201 STC rebate 3.1 yrs

Estimates assume 80% system efficiency, 35% self-consumption rate, 5c/kWh feed-in tariff, and STC Zone 2 ($39/STC, 8-year deeming period). Actual results vary based on roof orientation, shading, and usage patterns.

Solar Rebates in Western Australia

Available incentives that reduce the cost of solar installation in WA.

STCs provide an upfront discount of $2,500 to $4,000 depending on system size.

Synergy and Horizon Power offer time-of-use tariffs that improve solar self-consumption economics.

View all solar rebates

Popular Solar Panels

Top-rated panels available for installation in Melville City.

Compare all solar panels

How Solar Installation Works

1

Site Assessment and Quote

An installer visits your property, assesses your roof, checks shading, and provides a detailed quote based on your energy usage.

2

System Design and Approval

Your system is designed to maximise output. Council approval may be needed for heritage properties, but most residential installs are exempt.

3

Installation

A residential solar installation typically takes one day. The team mounts panels, installs the inverter, and connects the wiring.

4

Grid Connection and Meter

Your installer lodges paperwork with your distributor. Once approved, your meter is upgraded to a bi-directional meter and you start exporting.

Frequently Asked Questions

How many peak sun hours does Melville City get?

Melville City receives approximately 5 peak sun hours per day, based on its warm temperate climate zone. This means a standard 6.6 kW system can generate around 9,636 kWh annually.

What size solar system do I need in Melville City?

The right system size depends on your electricity usage. Average household consumption in Western Australia is 17 to 21 kWh per day. A 6.6 kW system suits most homes, while larger households or those with pools or EV chargers may benefit from a 10 kW or 13 kW system.

How much does solar installation cost in Melville City?

A 6.6 kW solar system in Melville City costs approximately $8,200 before rebates. Melville City is in STC Zone 2, which provides a rebate of $3,159 on a 6.6 kW system. After rebates, expect to pay around $5,041.

What is the payback period for solar in Melville City?

A 6.6 kW solar system in Melville City has an estimated payback period of 3.7 years, based on 5 peak sun hours per day and annual savings of $1,359. After the payback period, the system continues generating free electricity for its remaining 20+ year lifespan.

Do I need council approval for solar in Melville City?

In Western Australia, most residential solar installations are considered exempt development. Heritage-listed properties or certain zones in Melville may require approval. Your installer will confirm during the site assessment.

How Melville City Compares to Nearby Suburbs

Solar potential compared with neighbouring suburbs in the Melville area.

Suburb Sun Hours 6.6 kW Output Payback Solar Adoption
Melville City 6154 5h 9,636 kWh 3.7 yrs 23%
Applecross 6153 5h 9,636 kWh 3.7 yrs 20%
Attadale 6156 5h 9,636 kWh 3.7 yrs 20%
Canning Vale 6155 5h 9,636 kWh 3.7 yrs 28%
Jandakot 6155 5h 9,636 kWh 3.7 yrs 28%

All estimates assume a 6.6 kW system. Sun hours, output, and payback are based on the same methodology. Solar adoption shows CER-registered installations as a percentage of dwellings.

Nearby Suburbs

Solar installers in suburbs near Melville City.

Related Products

Solar output estimates use Bureau of Meteorology irradiance data and assume north-facing panels with no shading. Population and dwelling data: ABS 2021 Census. Electricity rates are state averages and may differ from your retailer's pricing. Get a personalised quote for accurate savings.