Gridly
QLD 4695 · Gladstone
Solar Panel Installation in Ambrose, QLD
Find a vetted solar installer in Ambrose. Compare quotes, check local solar data, and get a system designed for your roof.
Get Free Solar QuotesSolar Snapshot for Ambrose
Key data for sizing a solar system in Ambrose, QLD 4695.
1,114
Population
5.5/day
Peak Sun Hours
10,600
Est. Annual Output (6.6 kW)
$1,457
Est. Annual Savings
3.4 yrs
Est. Payback (6.6 kW)
$3,315
STC Rebate (6.6 kW)
Zone 1
Dwelling Mix in Ambrose
Breakdown of dwelling types based on census data — relevant for understanding rooftop solar potential.
Houses
99%
374 dwellings
Townhouses
0%
0 dwellings
Apartments
0%
0 dwellings
Ambrose is predominantly freestanding houses, ideal for rooftop solar installation.
Solar Adoption in Ambrose 4695
Installation data from the Clean Energy Regulator, current to May 2026.
310
Solar Systems Installed
Since 2001
5.8 kW
Avg System Size
1.8 MW
Total Installed Capacity
11
Battery Systems
Ambrose (4695) has 310 registered solar panel installations with a combined capacity of 1.8 MW. The average system size in this postcode is 5.8 kW. That's roughly 32% of dwellings with rooftop solar.
Installations grew 27% in 2025 compared to 2024, with 19 new systems registered so far.
Is Solar Worth It in Ambrose?
Ambrose gets 5.5 peak sun hours per day — above the national average. A 6.6 kW system here would produce roughly 10,600 kWh per year, saving an estimated $1,457 annually and paying itself off in 3.4 years.
At $4,885 after rebates, the upfront cost represents 6% of Ambrose's median household income ($78,988/year). Most households finance this over 3–5 years, with loan repayments typically offset by immediate savings.
Around 32% of dwellings in Ambrose have solar, below the Queensland average of 42%. This means there's significant room for more installations — and early adopters tend to benefit most from current rebate levels before they taper off.
With a payback under 4 years and 20+ years of remaining system life, solar in Ambrose is one of the stronger return-on-investment cases in Queensland. The question isn’t really whether solar is worth it here — it’s what size system to get.
Why Install Solar in Ambrose?
With 5.5 peak sun hours per day, Ambrose receives above-average solar irradiance for Australia. A standard 6.6 kW rooftop system here can generate approximately 10,600 kWh per year, saving an estimated $1,457 annually on electricity bills.
Ambrose has a population of 1,114 across 983 dwellings. Queensland's abundant sunshine and electricity rates of around 30c/kWh make it one of the best states for solar returns.
The median household income in Ambrose is $78,988 per year. At $4,885 after rebates, a 6.6 kW system represents 6% of annual household income, with savings that continue for 20+ years after the 3.4-year payback.
With car ownership at 94% of households, many residents in Ambrose could benefit from pairing solar with a home EV charger. Charging an electric vehicle from rooftop solar can save $1,000 to $1,500 per year compared to grid charging.
Estimated Solar Output & Payback in Ambrose
Based on 5.5 peak sun hours/day, 30c/kWh electricity, and STC Zone 1 rebate.
| System Size | Annual Output | Annual Savings | Cost After Rebate | Payback |
|---|---|---|---|---|
| 5 kW | 8,030 kWh | $1,104 | $4,004 $2,496 STC rebate | 3.6 yrs |
| 6.6 kW Most popular | 10,600 kWh | $1,457 | $4,885 $3,315 STC rebate | 3.4 yrs |
| 10 kW | 16,060 kWh | $2,208 | $6,469 $5,031 STC rebate | 2.9 yrs |
| 13 kW | 20,878 kWh | $2,871 | $7,948 $6,552 STC rebate | 2.8 yrs |
Estimates assume 80% system efficiency, 35% self-consumption rate, 5c/kWh feed-in tariff, and STC Zone 1 ($39/STC, 8-year deeming period). Actual results vary based on roof orientation, shading, and usage patterns.
Solar Rebates in Queensland
Available incentives that reduce the cost of solar installation in QLD.
STCs provide an upfront discount of $2,500 to $4,500 depending on system size. Queensland receives higher STC values due to its solar zone rating.
Queensland has no additional state solar rebate, but higher STC values partially compensate.
Popular Solar Panels
Top-rated panels available for installation in Ambrose.
Solahart Silhouette Series
455W, 22.8% efficiency
$165
Solahart SunCell Series
440W, 22% efficiency
$140
Canadian Solar TOPHiKu 6
440W, 22.5% efficiency
$130
Trina Solar Vertex S+
440W, 22% efficiency
$120
How Solar Installation Works
Site Assessment and Quote
An installer visits your property, assesses your roof, checks shading, and provides a detailed quote based on your energy usage.
System Design and Approval
Your system is designed to maximise output. Council approval may be needed for heritage properties, but most residential installs are exempt.
Installation
A residential solar installation typically takes one day. The team mounts panels, installs the inverter, and connects the wiring.
Grid Connection and Meter
Your installer lodges paperwork with your distributor. Once approved, your meter is upgraded to a bi-directional meter and you start exporting.
Frequently Asked Questions
How many peak sun hours does Ambrose get? ▼
Ambrose receives approximately 5.5 peak sun hours per day, based on its subtropical climate zone. This means a standard 6.6 kW system can generate around 10,600 kWh annually.
What size solar system do I need in Ambrose? ▼
The right system size depends on your electricity usage. Average household consumption in Queensland is 18 to 24 kWh per day. A 6.6 kW system suits most homes, while larger households or those with pools or EV chargers may benefit from a 10 kW or 13 kW system.
How much does solar installation cost in Ambrose? ▼
A 6.6 kW solar system in Ambrose costs approximately $8,200 before rebates. Ambrose is in STC Zone 1, which provides a rebate of $3,315 on a 6.6 kW system. After rebates, expect to pay around $4,885.
What is the payback period for solar in Ambrose? ▼
A 6.6 kW solar system in Ambrose has an estimated payback period of 3.4 years, based on 5.5 peak sun hours per day and annual savings of $1,457. After the payback period, the system continues generating free electricity for its remaining 20+ year lifespan.
Do I need council approval for solar in Ambrose? ▼
In Queensland, standard residential solar installations are self-assessable and generally do not need council approval. Properties in heritage areas or with specific overlays in Gladstone may need additional checks.
How Ambrose Compares to Nearby Suburbs
Solar potential compared with neighbouring suburbs in the Gladstone area.
| Suburb | Sun Hours | 6.6 kW Output | Payback | Solar Adoption |
|---|---|---|---|---|
| Ambrose 4695 | 5.5h | 10,600 kWh | 3.4 yrs | 32% |
| Agnes Water 4677 | 5.5h | 10,600 kWh | 3.4 yrs | 43% |
| Aldoga 4694 | 5.5h | 10,600 kWh | 3.4 yrs | 49% |
All estimates assume a 6.6 kW system. Sun hours, output, and payback are based on the same methodology. Solar adoption shows CER-registered installations as a percentage of dwellings.
Nearby Suburbs
Solar installers in suburbs near Ambrose.
Related Products
Solar output estimates use Bureau of Meteorology irradiance data and assume north-facing panels with no shading. Population and dwelling data: ABS 2021 Census. Electricity rates are state averages and may differ from your retailer's pricing. Get a personalised quote for accurate savings.