Evnex E2 Plus vs Myenergi Zappi: Which Solar EV Charger Is Better in Australia?

If you have rooftop solar and you’re buying a home EV charger in Australia, you’ve probably narrowed it down to two names: the Evnex E2 Plus and the myenergi Zappi. They’re the two most credible solar-capable smart chargers on the market, the E2 Plus is $196 cheaper at supply price, and they both use CT clamp solar diversion that works with any inverter.

This comparison breaks down every difference that actually matters, price, solar modes, OCPP, load management, warranty, installed cost, and the scenarios where each one wins.

The short answer

The Evnex E2 Plus offers more features and a lower supply price. The Zappi has a longer track record in Australia and deeper ecosystem integration. For most new buyers starting fresh, the E2 Plus is the stronger package. For buyers committed to the myenergi ecosystem or who specifically want the most field-tested solar diversion, the Zappi is the right pick.

Spec-for-spec comparison

	Evnex E2 Plus	myenergi Zappi v2.1 7kW
Supply price	$1,399	$1,595
Installed cost	From $2,300 (Evnex install)	$2,045–$2,345
Power	7.4kW (single-phase)	7kW (single-phase)
Solar integration	Yes, CT clamp	Yes, CT clamp
Solar modes	Solar-only, hybrid	Fast, Eco, Eco+
OCPP	Yes (closed 1.6)	Partial (1.6J, cloud-to-cloud)
Load management	Yes (dedicated)	No (indirect via CT)
Cable	8m tethered Type 2	6.5m tethered Type 2
IP rating	IP55	IP65
Warranty	4 years	3 years
App	Evnex app	myenergi app
Ecosystem	Standalone	Eddi, Libbi integration
AU field history	2025 onward	Established (3+ years)

Price and installed cost

The E2 Plus is $196 cheaper at supply price (Zappi tethered 7kW at $1,595 on myenergi’s Australian site, as of October 2026). Evnex’s own installation starts at $901 plus the charger for a simple job (charger within about 1m of the switchboard, ground floor), so an Evnex-installed E2 Plus starts from $2,300. Neither charger’s installation is meaningfully different in complexity, both require a CT clamp at the switchboard and standard single-phase wiring.

	E2 Plus	Zappi
Supply	$1,399	$1,595
Installation	From $901 (Evnex)	$450–$750
Total	From $2,300	$2,045–$2,345

The E2 Plus is cheaper at the supply stage, but once both are installed the totals land in a similar range, so site conditions matter more than the sticker price.

Solar charging: how they compare

Both chargers use the same fundamental approach, a CT clamp at the switchboard monitors solar export and adjusts charging speed to absorb surplus generation. Neither requires API access to your inverter. Both work with Fronius, SolarEdge, Sungrow, GoodWe, Enphase, and every other grid-connect system.

The difference is in how they implement solar modes.

Zappi: three modes

• Fast, full grid power, ignores solar entirely
• Eco, uses solar surplus, tops up from grid to maintain a minimum charge rate (configurable from 6A upward)
• Eco+, solar only, pauses charging when surplus drops below threshold

The Eco/Eco+ distinction and the configurable minimum boost current give the Zappi the most fine-grained solar control of any home charger in Australia. If you want precise control over how much grid top-up is allowed during solar charging, the Zappi is harder to beat.

Evnex E2 Plus: two modes

• Solar-only, charges exclusively from surplus, pauses when solar drops
• Hybrid, charges from solar when available, supplements from grid to meet a departure time target

The E2 Plus’s hybrid mode is more practical for most households. It ensures the car is always ready by departure time while maximising solar use. The Zappi’s Eco mode achieves something similar but requires more manual configuration.

Verdict on solar

The Zappi offers more control. The E2 Plus offers a more practical “set and forget” hybrid mode. For enthusiasts who want to fine-tune every kilowatt, the Zappi wins. For most households who want smart solar charging that just works, the E2 Plus is equally effective with less fiddling.

OCPP

This is the E2 Plus’s clearest advantage.

Evnex E2 Plus: OCPP 1.6, enables scheduled charging, solar-aware scheduling, remote session management, and energy reporting through the Evnex app. The implementation is closed (Evnex cloud only, not open to third-party OCPP backends), which limits power-user scenarios but is transparent for residential use.

Zappi: Partial OCPP. The charger uses myenergi’s own protocol, and myenergi’s Australian site lists OCPP as standard, delivered as OCPP 1.6J through a cloud-to-cloud service rather than a direct connection. It needs a Wi-Fi model, an agreement with an OCPP platform provider, and it leaves out the smart charging and reservation features of the spec.

In states where OCPP compliance is emerging as a grid connection requirement for high-amperage chargers, the E2 Plus is the more complete OCPP option.

Load management

E2 Plus: Dedicated load management using the CT clamp. The charger monitors total home current draw and reduces charge rate before the main fuse is overloaded. The solar CT clamp does double duty for load management, meaning no additional hardware.

Zappi: No dedicated load management. The CT clamp data is available in the app but the Zappi doesn’t automatically throttle based on household load. In older homes with smaller main fuses, this is a practical disadvantage.

For homes on 40A or 50A single-phase supply, common in older Australian houses, the E2 Plus’s automatic load management avoids the risk of tripping the main breaker when the charger runs alongside air conditioning, ovens, or hot water.

Warranty

• E2 Plus: 4 years
• Zappi: 3 years

One year longer. Both are above the 2-year standard that most sub-$1,500 chargers offer. The E2 Plus’s 4-year warranty is the best in the solar charger category at this price point.

IP rating and outdoor suitability

• Zappi: IP65, protected against water jets from any direction
• E2 Plus: IP55, protected against low-pressure water jets

Both are rated for outdoor installation. The practical difference matters in fully exposed, unsheltered locations, think a wall-mounted charger on the side of the house with no eaves, directly exposed to driving rain. In that scenario, the Zappi’s IP65 provides extra confidence. For garage, carport, or semi-sheltered installations, IP55 is perfectly adequate.

The myenergi ecosystem advantage

The Zappi integrates natively with two other myenergi products:

• Eddi, a hot water diverter that sends surplus solar to an immersion heater or heat pump hot water system
• Libbi, myenergi’s home battery that coordinates with the Zappi and Eddi for whole-home energy optimisation

If you’re building a complete solar self-consumption system, EV charging, hot water, and battery storage all managed from one app, the myenergi trio is the most integrated option available. No other manufacturer offers this level of cross-product solar coordination.

The Evnex E2 Plus is a standalone product. It does EV charging exceptionally well but doesn’t extend into hot water or battery management.

Cable length

A minor but practical difference:

• Zappi: 6.5m tethered
• E2 Plus: 8m tethered

The E2 Plus cable is 1.5m longer. That rarely matters, but if your charge point is mounted at the far end of a long garage, every centimetre counts.

Who should buy the Evnex E2 Plus

• You want OCPP alongside solar charging
• Load management matters (older home, smaller main fuse)
• You want the longest warranty available at this price
• You’re a new buyer with no existing myenergi products
• You want the most features for a similar supply price

Who should buy the Zappi

• You want the most field-tested solar EV charger in Australia
• Fine-grained solar mode control (Eco vs Eco+, configurable minimum boost) is a priority
• You’re building a myenergi ecosystem with Eddi and/or Libbi
• The charger will be installed in a fully exposed outdoor location (IP65)
• You value proven Australian track record over newer feature sets

The bottom line

The Evnex E2 Plus is the better-specified charger and the cheaper one at supply price. OCPP, load management, built-in 4G, an 8m cable and a 4-year warranty make it the stronger all-round choice for most Australian solar households buying a charger in 2026.

The Zappi remains the right choice for buyers who specifically want the most mature solar diversion platform in Australia, or who plan to build out the full myenergi ecosystem. Its three solar modes offer more control than the E2 Plus, and its longer field history in Australia means fewer unknowns.

For more detail on each charger, see our Evnex E2 review and Zappi review. For the complete picture including every brand and price point, see our best home EV charger guide for 2026.