Enphase IQ EV Charger 2 Review Australia 2026: Is It Worth It?

If you already have Enphase solar on your roof, the IQ EV Charger 2 is one of the more compelling home charger options in Australia. It talks natively to your Enphase system, charges from surplus solar without a separate CT clamp installation, and fits cleanly into the Enlighten app you’re already using. If you don’t have Enphase solar, it’s still a solid smart charger - but several competitors match or beat it at the same price point.

Key Specifications

Spec	Detail
Output power	7.2kW (240V, 30A)
Phase	Single phase
Cable type	Tethered Type 2
Cable length	7.6m
Connectivity	WiFi, Ethernet
OCPP	Yes - OCPP 1.6J
Load management	Yes (via DIN rail CT or Enphase gateway)
Weatherproof rating	IP66
App	Enphase Enlighten
Dimensions	420 x 280 x 115mm
Solar integration	Enphase IQ ecosystem native; non-Enphase via scheduling only
Australian RRP	~$899-$999 (supply only)
Warranty	5 years

Pros and Cons

Pros

• Native Enphase ecosystem integration - solar divert without CT clamp if you have Enphase solar
• IP66 rated - outdoor wall mounting is fine, including in exposed coastal locations
• Long 7.6m cable handles awkward garage layouts most tethered chargers can’t reach
• OCPP 1.6J support for third-party platform integration
• Cleaner installation where Enphase gateway replaces separate CT clamp sensor

Cons

• Solar divert only works natively with Enphase solar - non-Enphase users get scheduling only
• 7.2kW output (30A) sits slightly below the 7.4kW maximum a 32A circuit delivers - marginal, but worth noting
• App experience feels fragmented if you don’t have full Enphase solar + storage install
• 5-year warranty is shorter than the 7-year Evnex E2 or the Wallbox Pulsar Plus
• Limited Enphase-certified EV charger installer network in some regional areas

Design and Build Quality

The IQ EV Charger 2 has the clean, slightly clinical aesthetic that runs through the Enphase product line. White enclosure, flush-mounted cable holster, minimal labelling. It’s not as visually striking as the Wallbox Pulsar Plus but it doesn’t look cheap either.

The IP66 rating is a genuine differentiator at this price point. Many chargers at ~$900 are only IP54 rated. IP66 means you can mount this in a covered outdoor area - a carport with driving rain exposure, or a side wall that cops afternoon sun - without concern. The enclosure construction feels solid; this isn’t a product you’d worry about after a few Australian summers.

The 7.6m tethered cable is a highlight. Most tethered chargers ship with 5-6m cables. The extra length matters when your garage has the switchboard on the opposite wall to where the car parks, or when a second family member’s car needs to reach from a different position.

Performance and Features

At 7.2kW (30A), the IQ EV Charger 2 delivers approximately 42-46km of range per hour for most EVs. This is essentially identical to the 7.4kW output of competitors in practice - the 0.2kW difference equates to roughly 1-2km per hour, which is imperceptible.

Scheduled charging works as expected - set a window in the Enlighten app, and the charger starts and stops automatically. This is the feature most non-Enphase users will rely on.

Solar-divert charging is where the IQ EV Charger 2 separates itself - but only within the Enphase ecosystem. If your home has Enphase IQ inverters and an IQ gateway, the charger taps into real-time generation data directly from Enphase’s platform. When solar surplus exceeds the minimum charging threshold (around 1.4kW), the charger ramps up to use that surplus. When generation drops, it ramps down. The result is near-free daytime EV charging from solar, without needing a separate CT clamp sensor.

For non-Enphase solar owners, none of this applies. You can schedule charging for off-peak times via the app, but real-time solar divert is not available. At this price point, a Myenergi Zappi or Evnex E2 Plus with CT clamp would deliver better solar integration on a non-Enphase system.

Load management requires either a CT clamp sensor (supplied separately, DIN rail mounted) or the Enphase gateway. This prevents the charger from tripping your circuit when other heavy appliances run simultaneously.

App and Smart Features

Enphase Enlighten is one of the better energy monitoring platforms in the solar industry. If you have Enphase solar, adding the EV charger brings it into the same dashboard - you can see how much of your solar is going to the car, how much to the house, and what’s coming from the grid.

The EV charging controls within Enlighten are functional but not as polished as dedicated charger apps like the Wallbox or Evnex apps. Scheduling is straightforward. Solar boost mode is one-tap. Advanced session analytics (kWh delivered, session cost, carbon saved) are present but feel like secondary features rather than the primary focus of the app design.

If you’re not an Enphase solar owner, the app experience is competent but unremarkable. You’re essentially using a full-featured solar monitoring platform for a single charger function.

Installation Considerations

The IQ EV Charger 2 installs like any other Australian home EV charger - licensed electrician required, Type 2 outlet or tethered connection, 32A dedicated circuit from the switchboard.

A few Australia-specific notes:

• The charger is single phase only - three-phase supply offers no benefit
• If you have Enphase solar, the installer connects the charger to your existing Enphase gateway - no separate CT clamp needed for solar integration
• Without Enphase solar, a separate DIN rail CT clamp is required for load management - add this to your install quote
• Outdoor IP66 mounting is fully supported - confirm your electrician uses appropriate outdoor-rated cable conduit

Typical installed cost: $1,300-$1,600 on a standard switchboard with Enphase solar system present. Add $100-$200 if a CT clamp is needed for non-Enphase homes.

Solar and Battery Integration

This is where the IQ EV Charger 2 earns its premium for Enphase households. The integration isn’t just convenience - it’s technically tighter than CT clamp-based solar divert on competitors.

CT clamp solar divert on chargers like the Zappi or Wallbox measures power flow at the main supply point and adjusts charge rate accordingly. There’s typically a 30-60 second response lag as generation fluctuates. The Enphase integration goes direct to the inverter data, with faster response and the ability to coordinate with Enphase battery storage if you have it - the charger can be prioritised above or below battery charging in your energy hierarchy.

For Enphase battery owners, this means you can set a preference: charge the home battery first, then divert surplus to the car. Or charge both simultaneously. This level of energy orchestration isn’t available on non-ecosystem chargers.

Pricing and Value for Money

At ~$899-$999 supply, the IQ EV Charger 2 sits in the middle of the Australian home charger market:

Charger	Supply Price	Solar Divert	OCPP
Enphase IQ EV Charger 2	~$950	Enphase only	Yes
Evnex E2 Plus	~$1,299	Yes (CT clamp)	Yes
Myenergi Zappi 7kW	~$1,350	Yes (CT clamp)	No
Wallbox Pulsar Plus 7kW	~$1,345	Yes (CT clamp)	Yes
Evnex E2 Core	~$999	No	Yes

For Enphase solar owners, the IQ EV Charger 2 delivers ecosystem-native solar divert at a lower supply price than CT-clamp alternatives. That’s good value. For non-Enphase owners, you’re paying ~$950 for a charger that doesn’t solar divert - the E2 Core at $999 includes OCPP and load management and is a comparable option.

Who Should Buy This

Buy the Enphase IQ EV Charger 2 if:

• You have an Enphase IQ solar system (and ideally IQ batteries) - the ecosystem integration is genuinely excellent
• You want to charge from solar without a separate CT clamp installation
• You’re in a coastal or exposed location and want IP66 outdoor protection
• You value OCPP for future-proofing or fleet management

Look elsewhere if:

• You have SolarEdge, Fronius, or any non-Enphase solar - the solar divert benefit disappears
• You want the absolute best solar divert performance on a non-Enphase system - the Zappi still leads there
• You want the longest warranty - 5 years trails several competitors
• Budget is the priority - the Evnex E2 Flex at $799 supply delivers OCPP and scheduling at $150 less

Verdict: 7.5/10

The Enphase IQ EV Charger 2 is a well-built, genuinely useful product - but it’s built for a specific customer: someone who already runs Enphase solar and wants their EV charger to be part of that ecosystem. In that context, it earns a strong 8/10. Outside of the Enphase ecosystem, it’s a competent but unremarkable 7kW smart charger that trails competitors on solar divert and warranty length.

If your roof has Enphase, this charger is worth serious consideration. If it doesn’t, shortlist the Evnex E2 Plus, Wallbox Pulsar Plus, or Zappi instead.

---

For a full comparison of home EV chargers, see our best home EV charger guide. For solar charging explained, see our smart EV charging guide. For installation costs, see our EV charger installation cost guide.