Ohme ePod

Strengths

  • βœ“ Same tariff scheduling as Home Pro β€” auto-charges at cheapest rates
  • βœ“ OCPP 1.6J β€” open protocol for third-party integration
  • βœ“ Solar integration and load management via CT clamp
  • βœ“ Compact form factor β€” one of the smallest smart chargers available
  • βœ“ $195 cheaper than the Ohme Home Pro

Watch out for

  • βœ— Socket only β€” Type 2 cable purchased separately ($50–$100)
  • βœ— IP55 β€” not suited for fully exposed outdoor installations
  • βœ— New to Australian market β€” limited installer network
  • βœ— $1,200 is expensive for a socket charger β€” E2 Flex is $799
  • βœ— 7kW single-phase only

Ohme

ePod

7.4 kW 1-phase Level 2 EV charger (untethered socket)

Reviewed by Marcus WebbUpdated June 2026

$1,200 AUD

Cable option

Our Verdict

The Ohme ePod delivers the same automatic tariff scheduling, OCPP, solar integration, and load management as the Home Pro in a compact socket-only format at $1,200. It's the right choice for buyers who already own a Type 2 cable and want Ohme's tariff intelligence at a lower price. The $401 premium over the Evnex E2 Flex is justified only if tariff scheduling matters to you β€” on a flat-rate tariff, the E2 Flex at $799 is better value.

7.4 kW1-phaseType 2UntetheredIP55
Compare all
Read full review
Key Features
Max Output 7.4 kW
Phases 1-phase
Smart Charging Yes
Solar Integration Yes
App Control Yes
OCPP Yes
Specifications
Type
Level2-7kW
Max Output
7.4 kW
Phases
1-phase
Connector
Type 2
Tethered Cable
No (socket)
Smart Charging
Yes
App Control
Yes
Solar Integration
Yes
Scheduling
Yes
Load Management
Yes
OCPP
Yes
IP Rating
IP55
Warranty
3 years
Installation
Licensed electrician
Compatible Vehicles
All Type 2 EVs
Warranty & Installation
βœ“

3-year warranty β€” contact the manufacturer or installer for full warranty terms.

βœ“

Professional installation required β€” must be installed by a licensed electrician under Australian wiring rules.

Overview

The Ohme ePod is the compact, socket-only sibling of the Ohme Home Pro. It shares every smart feature β€” automatic tariff scheduling, OCPP 1.6J, solar integration via CT clamp, and load management β€” at $195 less by removing the tethered cable. The ePod’s form factor is notably small, making it one of the most discreet smart charger installations available.


Same brains, no cable

The ePod’s feature set is identical to the Home Pro:

FeatureOhme ePod
Tariff schedulingYes β€” automatic, retailer-integrated
Price capYes
OCPP1.6J
Solar integrationYes (CT clamp)
Load managementYes
Output7.4kW (32A, single-phase)
CableSocket only
IPIP55
Warranty3 years

The practical trade-off is convenience. A tethered charger means you walk into the garage, grab the cable, and plug in. A socket charger means you retrieve the cable from the boot or a wall hook, connect to the charger, then connect to the car. It’s a minor step, but one that matters if you charge daily.


ePod vs E2 Flex: the socket charger comparison

Both are socket-only smart chargers with OCPP. The comparison:

Ohme ePodEvnex E2 Flex
Price$1,200$799
Tariff schedulingAutomaticManual only
OCPP1.6J (open)1.6 (closed)
SolarYes (CT)No
Load managementYesYes
Warranty3yr4yr

The E2 Flex is $401 cheaper with a longer warranty. The ePod adds tariff scheduling and solar integration. On a flat-rate tariff without solar panels, the E2 Flex is the better buy by a wide margin. On a time-of-use tariff with solar, the ePod’s combined tariff and solar optimisation can save $200–$400 per year β€” recovering the price premium within 1–2 years.


Who should buy the Ohme ePod

Best for:

  • Buyers who want Ohme’s tariff scheduling at the lowest Ohme price
  • Households with a spare Type 2 cable who prefer socket flexibility
  • Tight wall spaces where the compact ePod form factor is an advantage

Skip if:

  • You’re on a flat-rate tariff β€” the Evnex E2 Flex at $799 is better value
  • You want a tethered cable β€” the Home Pro at $1,395 is the neater install
  • Budget is tight β€” the $401 premium over the E2 Flex only pays off on complex tariffs with solar

Frequently Asked Questions

01 What is the difference between the Ohme ePod and Home Pro?

The ePod ($1,200) is socket-only β€” you supply your own Type 2 cable. The Home Pro ($1,395) includes a 5m tethered cable. All smart features are identical: tariff scheduling, OCPP, solar integration, load management, and app control. If you already have a cable or prefer the flexibility of a socket charger, the ePod saves $195.

02 Ohme ePod vs Evnex E2 Flex β€” which is better value?

The Evnex E2 Flex ($799) is $401 cheaper and includes OCPP and load management with a 4-year warranty. The Ohme ePod ($1,200) adds automatic tariff scheduling and solar integration that the E2 Flex lacks. If you are on a time-of-use or wholesale tariff and want hands-off cost optimisation, the ePod's premium is justified. On a flat-rate tariff, the E2 Flex is the clear winner.

03 Does the Ohme ePod support solar charging?

Yes. Like the Home Pro, the ePod includes a CT clamp for solar surplus monitoring. It diverts excess solar generation to the EV and can supplement from the grid to maintain a minimum charge rate. Works with any inverter brand.

04 What cable do I need with the Ohme ePod?

A standard Mode 3 Type 2 to Type 2 cable (IEC 62196). A 5m cable costs $50–$100 from EV accessory retailers. If your car came with a portable EVSE that has a Type 2 plug, that cable is usually compatible with the ePod's socket.

You might also consider